APPARATUS FOR PRESSURE TEST AT HIGH TEMPERATURE T4-29 

COMPLIANCE

T4-29 APPARATUS FOR PRESSURE TEST AT HIGH TEMPERATURE is designed and manufactured in compliance with IEC 60884-1 Figure 41, 41a, 41b and BS 1363-1.
http://domino.iec.ch/webstore/webstore.nsf/Standards/IEC%2060884-1?openDocument

DESCRIPTION

APPARATUS FOR PRESSURE TEST AT HIGH TEMPERATURE is intended for testing pins provided with insulating sleeves. Such pins should be resistant to the stresses to which they may be subjected at high temperature, likely to occur in conditions approaching bad connection conditions, and at low temperatures in particular conditions of service.

FEATURES

Solid aluminium base plate

  • Rectangular blade with an edge 0,7 mm wide, to be used in the case of round pins

  • Blade having a round shape with a diameter of 6 mm and an edge of 0.7 mm

  • Frame with weight that exerts force of 2,5 N through the blade on the tested sample

  • Frame is so designed, that the blades are easily exchangeable

DESIGN

APPARATUS FOR PRESSURE TEST AT HIGH TEMPERATURE is a free standing, table top apparatus. It is intended for use in chamber so all materials are so selected that they can continuously withstand the temperature of 250 deg. C. It is equipped with inscription plate, made of anodised aluminium. On this plate are catalogue number and serial number that enable its traceability and certification. Base plate is made of anodised aluminium, on four legs. Vertical column is made of anodized sectional aluminium profile. Blades and weight are made of stainless steel. Sample support platform is made of chrome plated steel.

Address

PNK Engineering and Consultant Co., Ltd. 
222 UPA Place Building B  1st Floor
Soi Ramkumhange 164 Minburee 
Bangkok 10510

Contact

Tel +669 4412 5588   +66 2 170 9244
Fax +66 2 170 9245 

©2018 by PNK Engineering & Consultant create by Big Bear