Capacitive Voltage Probes

The CVP 2200 is used for measuring on telecommunication ports for lines with more than four balanced pairs or for unbalanced lines.

CVP 2200
The Capacitive Voltage Probe (CVP) is designed for measuring asymmetrical disturbances on cables with capacitive coupling principle.

CVP 2200

Capacitive Voltage Probe

  • CISPR 22 (EN 55022) and CISPR 16-1-2 compliant

  • Battery or DC power supply

  • Switchable conversion factor

  • Shielded to reduce the direct capacitive coupling from local cables

  • Calibration fixture included 

Description

The Capacitive Voltage Probe (CVP) is designed for measuring asymmetrical disturbances on cables with capacitive coupling principle. It gives the opportunity to do the measuring without disconnection of the tested cable (“in-situ”) and it avoids the influence of the transmission. Main parameter of the CVP is the coupling factor, measured in a calibration system with 50 Ω impedance. The capacitive voltage probe is specified in chapter 5.2.2 and Annex G of CISPR 16-1-2.

Product Suggestions
Screen Shot 2556-06-02 at 7.47.14 PM.png

NSG 435 ESD SIMULATOR

  • Programmable discharge voltage 200 V to 16.5 kV

  • Stabilized charging voltage

  • Pre-programmed IEC/EN 61000-4-2 test settings

  • True air-discharge breakdown voltage

  • Compact and lightweight design

Screen Shot 2556-06-02 at 7.48.01 PM.png

NSG 437 ESD SIMULATOR

  • Air- and contact-discharge up to 30 kV

  • Light version featuring uncompromised test performance

  • Compliant with a wide range of standards (IEC, ANSI, SAE, ISO)

  • Touch panel display controls

  • Easily and quickly interchangeable network modules

Screen Shot 2556-06-02 at 7.48.58 PM.png

NSG 438 HIGH END ESD SIMULATOR

  • Air- and contact-discharge up to 30 kV

  • Compliant with a wide range of standards (IEC, ANSI, SAE, ISO)

  • Built-in ISO self-calibration procedure

  • Powered by high-energy battery pack

  • Touch panel display controls

Address

PNK Engineering and Consultant Co., Ltd. 
222 UPA Place Building B  1st Floor
Soi Ramkumhange 164 Minburee 
Bangkok 10510

Contact

Tel +669 4412 5588   +66 2 170 9244
Fax +66 2 170 9245 

©2018 by PNK Engineering & Consultant create by Big Bear