CLIMATIC CHAMBERS KKXX

COMPLIANCE
It is constructed in compliance with IEC 60335-1, IEC 60065, 60950, ,...
INTRODUCTION
Climatic chambers are intended for performing different kind of test where the temperature and humidity of sample environment must be controlled within certain limits.
Our climatic chambers were designed with the following goals:
-
Safety
-
Reliability
-
Ease of operation
-
Ergonomical design
The BOLD features below are some of advantages that were introduced to reach these goals.
MAIN FEATURES (standard version)
-
Temperature range Tambient +5°C ÷ 95 °C
-
Forced convection with fan
-
Easy to use microprocessor controller with LED display – fully programmable
-
Innovative heating technology to ensure high temperature stability and temperature uniformity
-
10 adjustable programs each with up to 10 temperature/time ramps/set points
-
Adjustable temperature and humidity tolerance to start time count down
-
PID temperature controller
-
Dew-point principle humidity control
-
Visual and acoustic alarm in case of overheating and/or sensor error
-
Timer function – one ramp
-
Temperature set resolution 0.1 °C
-
Temperature display resolution 0.1 °C
-
Temperature stability ± 0.1 to 0.2°C (depending on the chamber size)
-
Relative humidity 15-95%
-
Relative humidity stability lower than ± 3%
-
Double over temperature protection
(over temperature shut-off 5°C above set temperature– microprocessor controlled)
(over temperature shut-off – mechanical )
-
Adjustable exhaust
-
All stainless steel interior AISI 304 mirror polished
-
Powder coated exterior (RAL 7035) – scratch resistant
-
Stainless steel shelve
-
Lockable door
-
RS – 232 communication port
-
Program for temperature sensor corrections (easy calibration without any mechanical interferences)
STANDARD MODELS:
