Line Impedance Stabilization Networks (LISN)

Line Impedance Stabilization Network (LISN) such as the NNB 51 and NNB 52 are used to measure distortion signals on the power cord of an electrical Equipment Under Test (EUT).

Product Description

DC-LISN-M2-25-V2
The DC-LISN-M2-25-V2 is designed for measuring disturbances on DC power ports in the frequency range from 150 kHz to 30 MHz.

 

DC-LISN-M2-100
The DC-LISN-M2-100 is designed for measuring disturbances on DC power ports in the frequency range from 150 kHz to 30 MHz.

 

CFL 9206
The CFL 9206 assists in preventing damage to input circuits of measuring equipment from high level transients often encountered during conducted emission testing.

 

NNB 51
Line impedance stabilization network (LISN) such as the NNB 51 are used to measure distortion signals on the mains cord of an electrical equipment under test (EUT).

 

NNB 52
Line impedance stabilization network (LISN) such as the NNB 52 are used to measure distortion signals on the mains cord of an electrical equipment under test (EUT).

Product Suggestions
Screen Shot 2556-06-02 at 5.11.40 PM.png

CDN 117/118

Teseq’s CDN 117 coupling-decoupling network enables convenient testing with surge pulses of 1.2/50 μs on data, signal or peripheral lines, as specified in many product standards. The test method, severity levels, permissible reaction of the EUT and specification of the coupling networks are included in IEC/EN 61000-4-5.

Screen Shot 2556-06-02 at 5.18.49 PM.png

CDN HSS-2

  • CDN for 1.2/50 μs pulse as per IEC 61000-4-5/Ed.3/77B/674A/CD:2012-05

  • CDN for up to 8 wire unshielded twisted pair (UTP)

  • Coupling to 1, 2 or 4 pairs

  • ISDN, 10/100BaseT, 1000BaseT

  • PoE applicable

Screen Shot 2556-06-02 at 5.19.38 PM.png

CDN E Series

  • CDNE M210 CDNE M2, 10 A, 30-300 MHz (banana), L, N

  • CDNE M310 CDNE M3, 10 A, 30-300 MHz (banana), L,N,PE

Address

PNK Engineering and Consultant Co., Ltd. 
222 UPA Place Building B  1st Floor
Soi Ramkumhange 164 Minburee 
Bangkok 10510

Contact

Tel +669 4412 5588   +66 2 170 9244
Fax +66 2 170 9245 

©2018 by PNK Engineering & Consultant create by Big Bear