Mains Dips And Drops Simulators 

Teseq offers high end single and multifunctional solutions for simulating Dips, Interrupts and Variations according to IEC/EN 61000-4-11 and IEC/EN 61000-4-29 standards.

 

The Teseq NSG generators can be used for single phase Dips Interrupts & Variations testing up to 270 V/16 A.

 

Three phase testing can be achieved with our ProfLine systems.

NSG 3040-DDV

Single function generator for single phase Dips Interrupts & Variations testing up to 270 V/16 A in compliance with IEC61000-4-11 and IEC61000-4-29

  • Fully IEC 61000-4-11 & 29 compliant

  • Large color display and touch panel interface

  • Standards and user test libraries

  • Wide range of accessories

Description

The NSG 3040 - DDV is the first in a series of single-function generators derived from the successful NSG 3040 family of combination generators.

 

Unlike the NSG 3040 system, which features a mainframe that is prepared, wired and tested for all possible module combinations and upgrades, the NSG 3040-DDV is designed to accommodate only the module required for dips, drops and variations. This function-specific design allows the NSG 3040 to provide full performance at the lowest possible price.
In addition to full compliance testing to IEC 61000-4-11 and -29 standards, the NSG 3040–DDV offers the basic performance features of all NSG 3000 series instruments: A robust and user-friendly interface, industry-leading design and quality, comprehensive safety features, and compatibility with all existing NSG 3000 series accessories.

 NSG 3060 

Multifunction Generator Systems - The Modular Solution for 6 kV Applications

  • Modular, expandable system

  • Surge, EFT/Burst, Power Quality, Ring Wave, and more

  • Surge voltage up to 6.6 kV for overtesting

  • ANSI and IEC coupling methods

  • Intuitive 7.2” color touch screen interface

  • Expert mode for changing parameters while test is running (diagnostics) 

  • Status LEDs

  • Safety connectors 

Description

Teseq’s new NSG 3060 is an easy-to-use multifunction generator that simulates electromagnetic interference effects for immunity testing in conformity with international, national and manufacturers’ standards including the latest IEC/EN standards. The NSG 3060 system is designed to fulfill conducted EMC test requirements for CE mark testing and ANSI C62.41, including Combination Wave Surge (6.6 kV), Electrical Fast Transient (EFT) pulses (4.8 kV), Ring Wave (6.6 kV), and Power Quality Testing (PQT). Expansion capabilities enable the system to be configured for a much broader range of applications including Telecom Surge 10/700 and Magnetic Field tests.

 

Featuring an innovative modular design, the NSG 3060 is a versatile system that can be configured for basic testing needs and expanded to meet the needs of sophisticated test laboratories. Teseq’s well proven “Master-Slave” architecture enables individual pulse modules to be calibrated separately, with calibration data and correction factors stored on the slave controller. New modules can be easily installed with no need to return the entire system for calibration.

 

Depending on your exact testing needs, different models are available to ensure the NSG 3060 is configured to your exact testing requirements.

Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse)
Pulse conforms to IEC/EN 61000-4-5 and ANSI (IEEE) 62.41

Burst (EFT) 5/50 ns
Pulse conforms to IEC/EN 61000-4-4

Dips & drops
Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29

Ringwave 0.5 μs/100 kHz
Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

 NSG 1007
 

Programmable AC and DC Power Sources

  • Combination AC and DC power source and power analyzer 

  • Arbitrary waveform generation

  • Built-in digital power analyzer

  • Meets source requirements for IEC 61000-3-2 and -3-3

  • 3 - 15 kVA for single and three phase applications (15 kVA per phase)

Description

The NSG 1007 series sources are high efficiency, lightweight AC and DC power sources which include high performance power analyzers.

With a crest factor of up to 5:1, the NSG 1007 series sources can drive difficult nonlinear loads with ease. Since many modern products use switching power supplies, they have a tendency to draw high repetitive peak currents. The Teseq sources can deliver a repetitive peak current of up to three times their rated continuous current.

With precise output regulation and accuracy, the sources address many application areas for AC and DC power testing. They provide a high load current capability, multi or single phase output modes, and built-in power analyzer measurements. Additional features including line distortion simulation (LDS), arbitrary waveform generation, and programmable output impedance address requirements for product quality and regulatory compliance testing.

 NSG 3040
 

Multifunction Generator Systems - The Smart 4 kV Solution For CE Applications

  • Modular, expandable system

  • Surge, EFT/Burst, Power Quality and more

  • Intuitive 7.2” color touch screen interface

  • Expert mode for changing parameters while test is running (diagnostics) 

  • Status LEDs

  • Safety connectors

Description

Teseq’s new NSG 3040 is an easy-to-use multifunction generator that simulates electromagnetic interference effects for immunity testing in conformity with international, national and manufacturers’ standards including the latest IEC/EN standards. The NSG 3040 system is designed to fulfill conducted EMC test requirements for CE mark testing, including Combination Wave Surge (4.4 kV), Electrical Fast Transient (EFT) pulses (4.8 kV) and Power Quality Testing (PQT). Expansion capabilities enable the system to be configured for a much broader range of applications including Telecom Surge 10/700 and Magnetic Field tests.

 

Featuring an innovative modular design, the NSG 3040 is a versatile system that can be configured for basic testing needs and expanded to meet the needs of sophisticated test laboratories. Teseq’s well proven “Master-Slave” architecture enables individual pulse modules to be calibrated separately, with calibration data and correction factors stored on the slave controller. New modules can be easily installed with no need to return the entire system for calibration.

Depending on your exact testing needs, different models are available to ensure the NSG 3040 is configured to your exact testing requirements.

Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse)
Pulse conforms to IEC/EN 61000-4-5

Burst (EFT) 5/50 ns
Pulse conforms to IEC/EN 61000-4-4 

Dips & drops
Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29Pulse conforms to IEC/EN 61000-4-4 

Refer to to the NSG 3040 datasheet on the Downloads tab for complete and detailed parameter descriptions.

ProfLine 2130

30 kVA three Phase Harmonics & Flicker Measuring System

  • Complete test system

  • IEC 61000-3-2, -3-3, -3-11 and -3-12

  • Three phase system up to 43 A per phase

  • Power source suitable for testing to many immunity standards 

Description

System

  • ProfLine 2130 is an accurate and flexible three phase system designed to measure harmonics & flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3. This system can also be used to test to IEC 61000-3-11 and IEC 61000-3-12 on products consuming up to 37 A per phase @ 230 VAC. The system is supplied complete with a stable, accurate, programmable 10 kVA per phase power source. The ProfLine 2130 system is therefore ready to measure and record any harmonics & flicker created by the EUT. A wide range of different AC source systems are available from Teseq, please see ProfLine 2103, 2105, 2115, 2145 datasheets for suitable systems at other powers or for single phase operation.

  • The system is delivered as a stand alone power supply unit and a suitable 19” rack housing the ancillary and measuring equipment, the system is ready to use with the supplied PC which has pre-installed software and calibration files.

ProfLine 2145

45 kVA three Phase Harmonics & Flicker Measuring System

  • Complete test system

  • IEC 61000-3-11 and -3-12

  • Option to include -3-2 and -3-3

  • Three phase system up to 62 A per phase

  • Power source suitable for testing to many immunity standards

Description

System

  • ProfLine 2145 is an accurate and flexible three phase system designed to measure harmonics & flicker in accordance with IEC 61000-3-12 and IEC 61000-3-11 on products consuming up to 62 A per phase @ 230 VAC. By adding the optional software and impedance this system can also be used to test to IEC 61000-3-2 and IEC 61000-3-3. The system is supplied complete with a stable, accurate, programmable 15 kVA per phase power source. The ProfLine 2145 system is therefore ready to measure and record any harmonics & flicker created by the EUT. A wide range of different AC source systems are available from Teseq, please see ProfLine 2103, 2105, 2115, 2130 datasheets for suitable systems at other powers or for single phase operation.

  • The system is delivered as a stand alone power supply unit and a suitable 19” rack housing the ancillary and measuring equipment, the system is ready to use with the supplied PC which has pre-installed software and calibration files.

Product Suggestions
Screen Shot 2556-06-02 at 5.19.58 PM.png

ISN T2

Impedance Stabilization Network (ISN) for Unshielded Balanced Pairs

  • For use with one unshielded balanced pair

  • CISPR 22, Ed.5.2, 2006 and EN 55022 Sept. 2006 (IEC/CISPR 22: 2005 modified) for Cat.3 and Cat.5

  • Changeable pin-arrangements with RJ11 and RJ45

  • Can be used as CDN for IEC 61000-4-6 immunity tests

Screen Shot 2556-06-02 at 5.20.21 PM.png

ISN T4

Impedance Stabilization Network (ISN) for Unshielded Balanced Pairs

  • For use with one or two unshielded balanced pairs

  • CISPR 22, Ed.5.2, 2006 and EN 55022 Sept. 2006 (IEC/CISPR 22: 2005 modified) for Cat.3 and Cat.5

  • Changeable pin-arrangements with RJ11 and RJ45

  • Can be used as CDN for IEC 61000-4-6 immunity tests 

Screen Shot 2556-06-02 at 5.20.58 PM.png

ISN T8

Impedance Stabilization Network (ISN) for Unshielded Balanced Pair

  • For use with one, two, three, or four unscreened balanced pairs

  • CISPR 22, Ed.5.2, 2006 and EN 55022 Sept. 2006 (IEC/CISPR 22: 2005 modified) for Cat.3 and Cat.5

  • 1000BaseT and PoE application

  • Changeable pin-arrangements with RJ11 and RJ45 

Address

PNK Engineering and Consultant Co., Ltd. 
222 UPA Place Building B  1st Floor
Soi Ramkumhange 164 Minburee 
Bangkok 10510

Contact

Tel +669 4412 5588   +66 2 170 9244
Fax +66 2 170 9245 

©2018 by PNK Engineering & Consultant create by Big Bear