Sine Wave Generators

NSG 4070
The NSG 4070 is a multifunctional EMC immunity test system.

 

ITS 6006
The ITS 6006 consist of an integrated RF signal generator, RF switch and EUT monitoring interfaces. The unit is designed for various radiated EMC applications in the 80 MHz to 6 GHz frequency range.

 NSG 4070 

Test System for Conducted and Radiated Immunity

  • Integrated signal generator 9 kHz to 1 GHz

  • 3 power meter inputs 9 kHz to 1 GHz

  • Integrated class A power amplifier module for different applications

  • Multiple EUT monitoring options

  • 5,7“ TFT color display

  • Internal, menu-based control software

  • Basic remote control software and report generator included

Description

The NSG 4070 is a multifunctional EMC immunity test system. Its large frequency range from 9 kHz to 1 GHz and its modular set-up using internal or external amplifiers enable a large variety of applications including tests according to IEC 61000-4-6, various BCI applications as well as signal generator and power meter for test systems as per IEC 61000-4-3, IEC 61000-4-20, IEC 61000-4-21 and many other applications. The powerful and easy to use firmware makes the NSG 4070 independent from an external PC and control software, however it can also be remote controlled for system operation. A state-of-the-art data transfer of test and measurement data for documentation is provided by USB stick to be plugged into the front panel.

 ITS 6006 

Radiated Immunity Test System 6 GHz

  • Integrated signal generator 80 MHz to 6 GHz

  • Integrated RF switch network

  • Multiple EUT monitoring options

  • 3.5“ TFT color display

  • Safety interlock function

  • Remote control via USB, RS232 or LAN

Description

            The ITS 6006 consist of an integrated RF signal generator, RF switch and EUT monitoring interfaces. The unit is designed for various radiated EMC applications in the 80 MHz to 6 GHz frequency range. In addition to the generator, the system includes the AM and PM modulators necessary for EMC testing. Other modulators can be connected to the external modulation input of the ITS 6006. The RF signal can be switched to one of four outputs, where up to four power amplifiers can be connected directly. Additional RF switches are available for combining two amplifier paths into a single antenna connection. Two of these relays are included for the four amplifier paths.
ITS 6006 interlock outputs ensure the activation of the power amplifier for only the selected signal path. The 3.5“color display shows the generator parameters. LEDs indicate the state of further functions. 

Product Suggestions
Screen Shot 2556-06-02 at 8.23.40 PM.png

ProfLine 2145

45 kVA three Phase Harmonics & Flicker Measuring System

  • Complete test system

  • IEC 61000-3-11 and -3-12

  • Option to include -3-2 and -3-3

  • Three phase system up to 62 A per phase

  • Power source suitable for testing to many immunity standards

Screen Shot 2556-06-02 at 8.41.30 PM.png

Line Impedance Stabilization Networks (LISN)

  • DC-LISN-M2-25-V2
    The DC-LISN-M2-25-V2 is designed for measuring disturbances on DC power ports in the frequency range from 150 kHz to 30 MHz.

  • DC-LISN-M2-100
    The DC-LISN-M2-100 is designed for measuring disturbances on DC power ports in the frequency range from 150 kHz to 30 MHz.

  • CFL 9206
    The CFL 9206 assists in preventing damage to input circuits of measuring equipment from high level transients often encountered during conducted emission testing.

  • NNB 51
    Line impedance stabilization network (LISN) such as the NNB 51 are used to measure distortion signals on the mains cord of an electrical equipment under test (EUT).

  • NNB 52
    Line impedance stabilization network (LISN) such as the NNB 52 are used to measure distortion signals on the mains cord of an electrical equipment under test (EUT).

Screen Shot 2556-06-02 at 8.47.21 PM.png

NSG 3040-DDV

Single function generator for single phase Dips Interrupts & Variations testing up to 270 V/16 A in compliance with IEC61000-4-11 and IEC61000-4-29

  • Fully IEC 61000-4-11 & 29 compliant

  • Large color display and touch panel interface

  • Standards and user test libraries

  • Wide range of accessories

Address

PNK Engineering and Consultant Co., Ltd. 
222 UPA Place Building B  1st Floor
Soi Ramkumhange 164 Minburee 
Bangkok 10510

Contact

Tel +669 4412 5588   +66 2 170 9244
Fax +66 2 170 9245 

©2018 by PNK Engineering & Consultant create by Big Bear